Description
ABOUT
HOLLANDLAC Satin is a high-performance enamel paint with a sophisticated, understated sheen. This formulation yields superior coverage and an easily maintained washable finish.
HOLLANDLAC Satin flows on easily, levels beautifully and conceals minor surface flaws. Although all paints perform best when applied over a FPE Primer/Undercoat, HOLLANDLAC Satin does not usually require a primer when applied over clean, previously painted oil finishes in good condition.
HOLLANDLAC white resists yellowing. However, even the highest quality white oil finishes will yellow in the constant absence of ultraviolet light; i.e., inside of a closet or in a room with little direct sunshine.
APPLICATIONS
Windows, doors, floors, trim, railing, cabinets, wainscoting, furniture, machinery, exterior architectural facades, shutters, garden furniture, gazebos, trellises, wooden and wrought iron, fences, floors, exterior decks and porches, and boats.
SURFACES
Wood, plaster, wallboard, metals and plastic
TECHNICAL
- Binder: Urethane alkyd resin combination
- Pigments: Titanium Dioxide, mineral and organic color pigments
- Solvent: Mineral Spirits
- Clean up: FPE Mineral Spirits
- Specific gravity [g/cm3]: 1.28 white (varies according to color)
- Solids by contents (white): by weight: 71%, by volume: 51%
- Viscosity: 95 – 100 KU
- Specular gloss: (60˚): 20.5 GU
- Recommended film thickness: wet: 65 microns/coat, dry: 33 microns/coat
- Drying Time: 2 hours dust free 16 hours recoatable depending on humidity
- Curing Period: 21 days. After this amount of time, the paint film will be at its maximum hardness.
- VOC: 330 g/l
IMPORTANT NOTE
Fine Paints of Europe sells paint systems. Do not use primers from other manufacturers. Please make certain that you are using the correct Fine Paints of Europe primer specified for your coating.
Never apply a Fine Paints of Europe paint to a surface that has been primed with a sealer such as Shellac, Bin™ or Kilz™. These are fine products when used for their intended purpose but they do not provide adequate friction for great adhesion with these coatings.
For optimal results: When applying HOLLANDLAC Satin, we recommend a light sanding with a fine grade of sandpaper – 220 or higher grit – between coats. This step should be followed by a light vacuuming or wiping down with a clean rag or tack cloth. Care should be taken to allow complete drying between coats and before sanding.